Coming soon · Bow Buddy Mount System
Hang it on the cage.
The Bow Buddy SxS Bar Mount clamps to the roll cage on your side-by-side, so your bow rides up high and locked in instead of bouncing around the bed.
- Fits 1"–2" round tube
- Stainless steel adapter
- Quick-release pull pin
- Locks in 4 directions
Coming soonSxS Bar Mount
Off the floorboard. Up on the bar.
A bow riding loose in the bed or across your lap takes a beating on every rut. The SxS Bar Mount gives it a solid home on the cage, right where you can grab it.
-
01
Clamp it to the cage
Two V-jaws bolt around any 1"–2" round tube. Vertical or horizontal bars.
-
02
Drop in the stainless adapter
The stainless post seats in the receiver and locks with a quick-release pull pin.
-
03
Hang your Bow Buddy
An anti-swing key holds it in one of four directions, and an R-clip keeps it from bouncing off on rough trail.
6-step installInstall
Bow-ready in six steps.
-
01
Set the receiver against the bar
The receiver and fixed jaw sit against the tube.
-
02
Add the outer clamp jaw
The loose jaw goes on the other side of the tube.
-
03
Tighten the two M6 bolts
Three bolt lengths come in the kit to cover 1" to 2" tube.
-
04
Drop in the stainless adapter
The post seats in the receiver with the key facing the way you want your bow.
-
05
Lock it with the pull pin
Pull the pin any time to move the adapter to another mount.
-
06
Slide on your Bow Buddy and clip it
Your Bow Buddy drops onto the stainless post and the R-clip keeps it there.
Bow Buddy Mount System
One adapter. Every mount.
The SxS Bar Mount is part of a system. The same stainless adapter fits the tree, wall and bar receivers, so your Bow Buddy moves from the cage to the stand to the garage with one pull of the pin.
The tree and wall mounts are part of the same coming-soon launch.
Coming soon
Be first to get one
Join the list and we'll email you the day the SxS Bar Mount launches.
We'll email you the moment the SxS Bar Mount is ready.
What will it clamp to?
Any round tube from 1" to 2" outside diameter. That covers most side-by-side roll cages, plus racks, stands and other round bars. It works on vertical or horizontal bars: the receiver re-bolts 90° for horizontal tubes.
Does it work with my Bow Buddy?
Yes. The stainless post is built for the Bow Buddy hanger. A key on the post locks it in place, and an R-clip keeps it on.
What do I need to install it?
A hex key for the two M6 bolts. The kit includes three bolt lengths to cover 1" to 2" tube.
Can I move it between mounts?
Yes. Pull the pin, lift out the stainless adapter and drop it into a tree, wall or bar receiver. The receivers stay where you mounted them.
When can I buy it, and how much is it?
We haven't announced the launch date or price yet. Join the waitlist and you'll be the first to know.
